How to Wash Your Car Like a Pro

Required Tools

For washing your car you will need the best pressure washer for cars. To clean a vehicle like a car or a motorcycle, an electric pressure washer works best. These machines provide sufficient power to wash your vehicle properly. Along with the above you will need some other tools, for example:

You will also need the personal protective equipments such as:

It’s important to take precaution beforehand instead of looking for the cure aftermath.

The entire process is presented step by step:

Step 1

At first you have to take your car to a place where there is enough space around the vehicle so that you can wash it comfortably. Your washing area should have appropriate drainage system for the dirty water to pass. Otherwise, the place will become wet and mud will come out with your sandal what you definitely don’t want.

Keep your pressure washing machine a little away from your car so that the sprinkled water drops don’t fall on it and spoil its engine. If it is a sunny day you can do this work in an open place such as, under a tree where you will get some shade.

Step 2

Now, set your machine up for washing by connective all its parts such as hose, spray gun, power connector, etc. In a pressure washing machine you need to connect all the pipes properly. It’s important to find the best pressure washer for cars so that your work becomes easy. If your machine is an electric one than connect it with electric point and if it runs on gas fill in the tank with fuel. You have to choose a proper nozzle for washing your car. 

A nozzle is a small part that is attached at the top of the spray gun and decides the spray speed and range. The 25 and 40-degree nozzles are best for car washing. If you choose a powerful nozzle the pressurized water might harm the surface paint of your car and if you use less powerful nozzle it might not provide enough force.

Step 3

Mix the detergent solution in a bucket and put your garden hose in it and join it with the machine. If your machine has a detergent tank you just have to put the solution into its tank. Switch on the machine and rinse some water on the entire car.

After getting the car wet, spray the detergent solution evenly on all sides. If there is any hard oil or grease stain, put some detergent directly on it and rub with a soft cloth or foam. This will help the grease and oily stuff go away and make the surface shiny. You can use the soap applicator nozzle for applying detergent effectively.

Step 4

Now put either the 25 or 40-degree nozzle and spray the water on the surface. Spray water evenly on all the sides so that no dirt remains on the surface. While spraying, be careful about the water force. Hold the spray gun tightly and keep it on a moderate distance.

Take some time spraying on the tires because mud gets stuck on them. Clean underneath of your car. This machine will be helpful for you to clean the remote corners of your vehicle. To find the best quality nozzles you can visit pressurewasherclub.com.

Step 5

After you cleaned the car properly keep it for drying for some time. If you are in a hurry you can wipe the water on the surface. Now it’s time to make it shiny. Some people apply some wax on the car to make it shiny and smooth. You should use a rubbing wheel to put wax; with a normal cloth or foam also you cannot make it shiny. Wipe all the mirrors properly for a better view. You have to make sure that no dirt or detergent is stuck on your vehicle.

Step 6

It’s time to wrap up all your instruments and tools and close down the cleaning job. Disconnect all the components of your pressure washing machine and wrap the hose on its holder. Keep the nozzles in their places and take the machine to your garage for storing. The car is ready to shine on your next trip. It’s important to keep off the children because the machine has the capability to harm them.